Raleigh ebike User Manual - 4  Charging The Battery

12  

V User Manual Impulse Pedelec

4  Charging the battery

›

You can charge the battery whilst it is on the  

Pedelec (as described in ➠ Chapter 1 “Quick start”).  

›

You can also remove the battery from the holder 

and charge it in the docking station. This is recom-

mended if it is cold outside, in order to charge the 

battery in a warm room. The battery can be 

charged at temperatures between 0 and 45°C. 

Carry handle

LED display panel

›

1.  Grip the battery by the handle, insert the key 

into the lock and turn it anticlockwise.  

Unlocking the battery

›

2.  Now the battery is unlocked and can be  

removed. To remove it, tilt the Pedelec to one side. 

In doing so, hold on tight to the battery to prevent 

it from being dropped. 

Tilt when removing 

›

3.  You should now remove the key and keep it in a 

safe place to prevent it from breaking off or being 

lost.

4.1  Learning cycle

After fully charging the battery for the first time and 

thereafter roughly once every six months, you must 

run the battery down until the system switches off. 

This procedure (a so-called “learning cycle”) is nec-

essary so that the battery management recognises 

the changes in the capacity caused by age and wear 

and tear, in other words, the performance level of 

the battery. Afterwards, the capacity of the battery is 

calculated anew and correctly represented. With this 

procedure, you can prevent a sudden loss of electrical 

assistance during an extended trip.