Raymarine ST60 Tridata Owner's Handbook Manual - 4.4 Dealer Calibration
Chapter 4: Calibration
31
Leaving Intermediate calibration
Press the
disp
and
lock
keys for 2 seconds, to exit Intermediate calibration and
return to normal operation.
4.4 Dealer calibration
Dealer Calibration enables the following parameters to be set:
• User calibration on/off.
• Pointer response.
• Heading display response.
• Boat show mode on/off.
Dealer calibration also gives access to the Factory defaults screen. This enables
you to re-apply the factory settings if you want to reset the instrument to a known
operating condition.
To commence Dealer calibration, hold down the
disp
and
lock
keys together for
approximately 12 seconds to select the Dealer calibration entry screen (see
Dealer calibration
flow chart). Then press the
and
>
keys simultaneously, to
start the calibration sequence.
D4395-1
Intermediate Calibration
Press
and
For 2 seconds
to exit Intermediate calibration
Hold down
and
for approximately 4 seconds
Software version
number
Instrument
status
CAL
TRUE
MAG
r 0 = master
r 1 = repeater
CAL
TRUE
MAG
disp
lock
disp
lock
disp