Rioworks PURCA User Manual - page 29
of
78
Hardware Installation
WARNING
??
The CPU and/or motherboard will overheat if there is not enough
airflow across the CPU and onboard heatsink. Damage may occur to
the motherboard and/or the CPU fan if these pins are incorrectly
used. These are not jumpers, do not place jumper caps over these
pins
.
NOTE
??
The “Rotation” signal has to be used with fan specially designed with
rotation signal.
??
Only the fan marked CPU fan1can be monitored by BIOS.
12. Wake-On-LAN Port (Onboard LAN Port)
This connector connects to internal LAN cards with a Wake-On-LAN output.
The connector powers up the system when a wakeup packet or signal is
received through the LAN port.
P U R C A W a k e O n L A N
W a k e - O n - L A N P o r t
1-15