Rioworks PURCA User Manual - In Case of Problems

In Case of Problems 

If after making and saving system changes with Setup, you discover that your 

computer no longer is able to boot, the PhoenixBIOS supports an override to 

the CMOS setting, which resets your system to its defaults. The other way is 

clear the present CMOS information. (Refer to the jumper setting.) 

The best advice is to only alter settings, which you thoroughly understand.  In 

the end , we strongly recommend that you avoid making any changes to the 

chipset defaults.  These defaults 

have been carefully

 chosen by both 

PhoenixBIOS  to  provide the 

maximum

 performance and reliability of the 

system. Even a slight change to the chipset setup may also cause potential 

and unpredictable failure to the system. 

2-4 

BIOS Setup