Rioworks PURCA User Manual - Press

3-2 

??

Press

Pressing  switches to the POST screen and takes one of two actions: 

1.  If MultiBoot is installed, the boot process continues with the POST   

       screen until the end of POST, and then displays the Boot First  

        Menu, text-based with these options: 

A: Load the operating system from a boot device of your choice. 

B: Enter Setup. 

C: Exit the Boot First Menu (with ) and load the operating   

     system from the boot devices in the order specified in Setup. 

2. 

 If MultiBoot is not installed, the boot process continues as usual.

??

Press

Pressing  at any time during POST switches to the POST  screen (if not 

already displayed) and enters Setup. 

??

POST Error 

Whenever POST detects a non-fatal error, QuietBoot switches to the POST 

screen and displays the errors. It then displays this message:   

Press to resume, to Setup 

Press to continue with the boot. Press if you want to correct the 

error in Setup.  

??

Keyboard Input Request 

If the BIOS or an  Option ROM (add-on card) requests keyboard input, 

QuietBoot switches over to the POST screen and the Option ROM displays 

prompts for entering the information. POST continues from there with the 

regular POST screen.

Phoenix MultiBoot 

Phoenix MultiBoot expands your boot options by letting you choose your boot 

device, which could be a hard disk, floppy disk, or CD ROM. You can select 

BIOS Utility