Riso RP3100AW User Manual - 106
106
S
kipping
the Registration Mark
You can specify the scanning start point between 0mm and
99mm (approx. 0" and
3
⁄
8
") from the top of an original. This
feature enables you to skip the registration marks* on the
original and print on the finish-sized paper without any of
these marks.
* About the Registration Mark
In the field of commercial printing, it is normal to print on
paper that is larger than the finished size and then cut
down to the finished size afterwards. The symbol that
indicates the position to cut in this event is known as the
registration mark.
Important!
• When enlargement or reduction is performed, the image
reproduction is made after skipping the registration
mark.
• Multi-Up printing is not available when the [Regist. Mark
Skip] function is activated.
☞ p.86... Printing Originals Side by Side
Display the [Catalog] tab on the
sub-panel window and then touch
the [Functions] button.
The [Functions] window appears.
Ready to Make Master
A desired function can be
selected from the list
The properties of your RISO
printer can be changed
Functions
Properties
Selections
Job List
Program
Catalog
A3/Black
13:59
Idle
M
Page No. 1
Local
Display the [Regist. Mark Skip]
button.
Touch the [h] or [j] button to display this function
button.
NOTE
The number of function buttons will differ
depending on the printer model and the
configuration of the optional devices.
A3/Black
13:59
Functions
P.2/3
Job Separation
Paper Data Entry
Ready to Make Master
Idle
Close
Regist. Mark Skip
Stack Guide Adjust
D-Feed Check
Jump Wing Control
M
Sub-panel
Catalog
1
2