Riso RP3100AW User Manual - 121
121
Touch the other function button
you want to register.
If a desired button is not displayed on the window,
touch the [h] or [j] button to scroll through the list.
NOTE
• Only non-registered functions can be
selected in the window. The functions
that cannot be selected will be grayed
out.
• [No Entry] can also be selected. In this
event, the selected option frame will
disappear from the [Selections] tab of
the Sub-panel window.
A3/Black
13:59
Cancel
OK
Entry-Choice 4
Blocked
Select a Function to be Listed
P.2/3
Semi-Auto (Master)
Paper Data Entry
Job Separation
D-Feed Check
Stack Guide Adjust
Jump Wing Control
Properties
Touch the [Choice] frame whose
function to be changed in the [Copy
(or Data) -Md-Selections] window.
The function entry window appears for the
selected [Choice] frame.
• Refer to the steps 1 to 3 in the section
[Registering Frequently-Used Functions] on page
117 for the procedures required to display [Copy-
Md-Selections] or [Data-Md-Selections] window.
• If a desired button is not displayed on the
window, touch the [c] or [d] button to scroll
through the list.
Properties
A3/Black
13:59
Choice1
=
Book Shadow Editor
Choice2
=
Side Margin Change
Choice3
=
Confidential Mode
Choice4
=
Idling Action
Close
Copy-Md-Selections
Blocked
Changing Registered Functions
Recalling Functions Quickly
1
2