Riso RP3100AW User Manual - 132
132
Touch the [Single Page Mode]
button.
The [Single Page Mode] window appears.
Setting Up Single-Original Program
Display the [Program] tab on the
sub-panel window and then touch
the [Register] button.
A message stating [Select a Register Frame for a
Program] appears.
• Only the Register Frame buttons which are not
occupied with program settings can be selected.
• If no vacant Register Frame button is displayed
on the window, scroll through the list by
touching the [h] or [j] button.
Touch a vacant Register Frame
button.
The program type selection window appears.
NOTE
Up to 12 program settings can be
registered in total.
Delete unwanted programs when the
memory is full.
☞ p.139... Erasing a Saved Program
Setting
Automatic Sorting into Groups
Ready to Make Master
Retrieve
Register
Change
Clear
Selections
Job List
Program
Catalog
A3/Black
13:59
P-1
P.1/4
P-2
P-3
P-4
P-5
P-6
Select a Register Frame for a Program
Idle
M
Ready to Make Master
Retrieve
Register
Change
Clear
Selections
Job List
Program
Catalog
A3/Black
Idle
13:59
P-1
P.1/4
P–2
P
-
3
P
-
4
P-5
P-6
Select a Register Frame for a Program
M
P–1
P.1/4
P–2
P–3
Select the Type of Program
to be Registered
Selections
Programme
Catalog
A3/Black
13:59
Select a Register Frame for a Program
Idle
M
Single Page Mode
Multi-Page Mode
Program Type
Cancel
1
2
3