Riso RP3100AW User Manual - page 46
46
Press the Start key.
The scanning operation starts.
The window returns to the scanning mode basic
window after scanning.
• Repeat steps 6 and 7 until all originals are
scanned when multiple originals are placed on
the Stage Glass.
• All originals set in the optional ADF unit will be
scanned consecutively.
A 4
Standard
Advanced
Line
Duo
Photo
Option
100%
Scanning Data
Image
Size
Contrast
Paper
Blocked
13:59
Advanced
Preview OFF
Scanning Mode
A3/Black
80%
Manual
Auto
NOTE
When the [Preview] function is
activated, a test print will be created
after the scanning operation to allow
you to check the scanning result with an
actual printout.
☞ p.49...Confirming the Scanning
Result
Expanding Functions with the Document Memory Card
Place an original on the Stage
Glass or in the optional ADF Unit.
• If placing originals on the Stage Glass, open the
Stage Cover and place an original face down.
Position the original according to the indicators
on the left-hand side of the glass.
Close the cover, resting it gently on the original.
• If placing originals in the optional ADF Unit,
open the ADF Original Receiving Tray and
adjust the ADF Original Guides to the width of
the originals. Then place the originals face
down in the ADF Unit. The originals are
automatically fed and set into place.
NOTE
• A maximum of 50 originals can be set
into place on the ADF Unit at one time.
• Even if multiple originals are scanned
in an operation using the ADF unit,
the whole scanned data are stored in
a data file.
7
8