Riso RP3100AW User Manual - Elcome to The Riso
5
29
Basic Procedure
NOTE
When an original is in place, the
process automatically changes to
master-making from printing. The
"Ready to Make Master" message
appears in the Main Display.
Place an original on the Stage
Glass or in the optional ADF Unit.
-
If placing originals on the Stage Glass, open
the Stage Cover and place an original face
down. Position the original according to the
indicators on the left-hand side of the glass.
Close the cover, resting it gently on the original.
-
If placing originals in the optional ADF Unit,
open the ADF Original Receiving Tray and
adjust the ADF Original Guides to the width of
the originals. Then place the originals face
down in the ADF Unit. The originals are
automatically fed and set into place.
NOTE
A maximum of 50 originals can be set
into place on the ADF Tray at one time.
!
Caution
Do not force the cover down
on top of a bound original
placed on the Stage Glass.
3
44
Documents, books and other originals can be scanned on the printer, and the
scanned data can be stored in the storage memory.
The storage data can be recalled and printed at any time.
In the same way as when printing in the Copy mode, it is possible to enlarge and
reduce page sizes and adjust the scanning contrast when scanning documents in the
Scanning mode.
Touch the [Scan] button on the
[Storage File Selection] window.
The [File Storage Stage] window appears.
¥ Refer to step 1 in the section Recalling the
Storage File (page 39) for details on
displaying the [Storage File Selection] window.
¥ It is also possible to change the file name and
owner s name in this stage if necessary.
☞ p.50...Renaming the Scanned Data File
and Its Owner.
Touch the [Page Size] button.
The [Page Size Entry] window appears.
Scanning and Saving Document Data
File Storage Stage
Rename
Specify the File Properties for Scanning
Scanning Mode
Page Siz
age Size
Rename
File Name
Page Size
Owner
SCAN000001
A3
RISO
A3/Black
Blocked
13:59
OK
Cancel
Page Size Entry
A3
Specify the Page Size
Scanning Mode
A4
A4
B4
A4
P.1/1
B5
B5
Postcard
U-1
A3/Black
Blocked
13:59
OK
Cancel
Touch the Size button for the
relevant page size.
If the required [Size] button is not displayed on
the window, touch the [h] or [j] button to scroll
through the list.
Important!
Select a paper size that matches the enlarged or
reduced page size if you change the
reproduction ratio in scanning.
Expanding Functions with the Document Memory Card
1
2
3
A3/Black
Blocked
13:59
S
Scan
Scan
Storage File Selection
Storage File Selection
Select a Storage File
Select a Storage File
Leaf
Test
Form1
Form2
RISO
RISO
Free Area:
18MB
(57%)
RISO
RISO
01/31/00
02/11/00
02/03/00
01/31/00
W
elcome to the RISO
RP Series Model
Thank you for purchasing a RISO RP series model, which combines the clear
reproduction of a printing machine with the convenient functions of a copier, keeping
the operation sound as low as possible.
With its large-sized direct-touch-control LCD and dialog messages, this equipment has
been specially designed for simple operation.
About This User's Guide
This guide provides all information necessary to use your RISO RP series model. It is
designed to help you take advantage of the features built into your RISO RP series
model, and provides information on maintenance and troubleshooting.
[Pictorial Guide]
e Original
e Functions used in the Copy mode
e Printed copy
e Functions used in the Data mode
28
B
asic Procedure
Turn the power switch ON.
The power switch is located on the lower right
side of the machine.
NOTE
When your RISO Printer is sleeping in
the Energy saving mode, the indicator
on the Wake-Up key lights. In this case,
press the Wake-Up key to wake up your
RISO Printer.
☞ p.159
Check the settings on the control
panel.
When the power is connected, the Main Display
and control panel indicators show the initial
settings.
Make any necessary changes, such as
reproduction size and processing mode.
Holding down the Reset key longer than one
second returns the control panel to the initial
settings.
NOTE
¥ When the message "Processing Data"
appears on the Main Display, it
indicates that document data have
already been received from the
computer and are being processed in
the system of the machine. In normal
operation, the print job of this document
data will start within a few minutes. If it
is not required to proceed with your
original urgently, wait until this print job
finishes.
I
—
ON
—
OFF
WAKE-UP
A3/Black
13:59
SORTER>OFF AUTO-GO>OFF
Ready to Print
Ready to Print
Renew Page
Reserved
Fine
10 . 0mm
A
10 . 0mm
D-CHECK>OFF
Aux. Menu
Print Position
Paper
READY
M
A 3
3
Standard
Standard
A3/Black
13:59
SORTER>OFF AUTO-GO>OFF
Ready to Print
Ready to Print
Renew Page
Reserved
Fine
10 . 0mm
A
10 . 0mm
D-CHECK>OFF
Aux. Menu
Print Position
Paper
READY
M
A 3
3
Standard
Standard
START
STOP
RESET
CENTER
POSITION
SLOW
FAST
SPEED
DENSITY
LIGHT
DARK
TEST PRINT
1 2 3 4 5
1 2 3 4 5
1
2
3
4
5
6
7
8
9
0
C
WAKE-UP
PROPERTIES
DATA/COPY
1
2
Operation Instruction
Describes operation
procedures with simple
numbered steps.
Cross-reference Remark
Indicates other sections
of the User's Guide
where you can find
related descriptions.
Advice Remark
Gives you helpful advice
for trouble-free operation
under the following
heads:
NOTE
Important!
Panel Highlight
Indicates the key and/or
indicator to be used or
referred to during
operation.
Main Display Frame
Indicates the message
to be displayed in
relation to an instructed
operation.
Safety Remark
Gives you safety
instructions under the
following icons:
!
Caution
!
WARNING