S.E. International Radiation alert Monitor 1000 EC Operation Manual - page 14
14
Observer USB Meter Screen
The Observer USB Meter Screen (Figure 6(3)) simulates a digital
meter to display the readings collected by the detector.
Zero
When the
Zero is clicked, the averaging of the collected
counts starts over.
Averaging Time
The
Averaging Time selects the amount of time in which
the previous readings are averaged. The longer the
averaging time, the more accurate your reading. Shorter
averaging times allow significant changes to be seen more quickly.
Units
To switch between units of measurement, use the
Units drop down menu. The Units drop down box
selects the unit of measurement displayed on the y axis of the chart screen. You can select
Averaging
Time and the Units of measurement of the chart screen and the meter screen.
Echo Monitor 1000
EC
Display
When Echo Monitor 1000
EC
Display is checked, only the meter screen will mirror the display of the
Monitor 1000
EC
.
Enable Alarm at and Latch Alarm
You must first check
Use Audible Alarm in View > Preferences to enable the alarm on your computer’s
sound system. The
Enable Alarm at box will activate the alarm that is built into the software. Once the
radiation levels go back below the set level of the alarm, the alarm will stop unless you have checked
Latch Alarm. When Latch Alarm is checked, the alarm will continue to go off until the reset button is
pressed. This is a USB Observer Software alarm only, not the alarm on the Monitor 1000
EC
.
Show Grid
Show Grid displays an ongoing collection of
data based on the user selectable settings in
the View > Preferences > Grid Settings dialog
box (Figure 6(4)).
Save Grid and Clear Grid
You can save or clear the Grid at any time by
clicking on the
Save Grid or Clear Grid boxes.
File
Save Chart
A text file of the Chart data is saved.
Save Grid
A text file of the Grid data is saved.
Exit
Closes the program.
Figure 6(3)
Figure 6(4)