Saabng SND-3080 User Manual - page 24
_ camera setup
camera setup
dAy/NIGhT
You can specify a recording mode according to the scene.
For selecting and saving each menu item, refer to "how to use the keyboard controller". (page 20)
Select
Select a screen transition mode according to the
illumination, and set options as appropriate.
DAY : Fixed to DAY mode, regardless of the
scene.
NIGHT : Fixed to NIGHT mode, regardless
of the scene.
If BURST is set to
output.
AUTO : According to the luminance, this will
switch DAY to NIGHT mode, or vice versa.
DAYNIGHT / NIGHTDAY : If set to
level triggering the mode switch between
DAY and NIGHT as well as the interval.
MASK AREA : If there exists a bright spot
light source in a night scene, you can specify
the size and position as needed.
Any excessively bright area in a night scene
will be masked.
WhITe BAL
If you need to adjust the screen brightness, use the WHITE BALANCE function.
For selecting and saving each menu item, refer to "how to use the keyboard controller". (page 20)
Select
Select a mode where you set the balance.
DAY : You can set the RED, and BLUE value
in DAY mode.
NIGHT : You can adjust the
according to the ambient luminance.
1.
2.
1.
2.
AUTO
BURST
OFF
DAYNIGHT
BRIGHTNESS
MID
DWELL TIME
2S
NIGHTDAY
BRIGHTNESS
MID
DWELL TIME
5S
MASK AREA
1 2
WHITE BAL
DAY/NIGHT
DAY
MODE
ATW2
RED
[ 00] ---- I ----
BLUE
[ 00] ---- I ----
MASK AREA