Saabng SND-3080 User Manual - page 38
_ network connection and setup
network connection and setup
poRT RANGe FoRWARd (poRT mAppING) SeTUp
If you have installed an IP router with a camera connected, you must set the port range
forwarding on the IP router so that a remote PC can access the camera in it.
manual port Range Forwarding
From the Setup menu of the IP router,
select
For setting the port range forward for
a third-party IP router, refer to the user
guide of that IP router.
Select
each connected camera to the IP
router.
Each port number for the IP router
should match that specified in
-
When done, click [Save Settings].
Your settings will be saved.
CoNNeCTING To The CAmeRA FRom A ShARed LoCAL
pC
Launch
It will scan for connected cameras and
display a list of them.
Double-click a camera to access.
The Internet browser starts and
connects to the camera.
You can also access the camera by typing
the IP address of the camera in the address bar of the Internet browser
1.
2.
3.
1.
2.
M