Saabng SND-3080 User Manual - page 34
_ network connection and setup
network connection and setup
IPv4
Scans for cameras with the IPv4 setting.
IPv6
Scans for cameras with the IPv6 setting.
Search
Scans for cameras that are currently connected to the network.
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
Auto Set
<
IP Installer> will automatically configure the network settings for you.
Manual Set
You should configure the network settings manually.
Exit
Exits the IP Installer program.
STATIC Ip SeTUp
manual Network Setup
Run
At the initial startup, both [Auto Set] and [manual Set] will be grayed out.
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
Select a camera in the search list.
Find the MAC (Ethernet) address labeled
on the rear of the camera.
Both the [Auto Set] and [manual Set]
buttons will be activated.
Click [manual Set].
The MANUAL SET dialog appears.
The default values of
The default
In the
pane, provide thenecessary information.
MAC (Ethernet) Address : The MAC
(Ethernet) address of the applicable
camera will be set automatically so you
don't need to input it manually.
M
1.
2.
3.