Rev. 1.4 sabio digital kn1 assembly guide 1 of 11 www.Sabioproducts.Com sabio digital sd-kn1 notebook assembly guide rev. 1.4.
Rev. 1.4 sabio digital kn1 assembly guide 2 of 11 www.Sabioproducts.Com table of contents section 1.0 - overview.............................................................................. 3 section 2.0 - before you begin................................................................. 3 section 3...
Rev. 1.4 sabio digital kn1 assembly guide 3 of 11 www.Sabioproducts.Com section 1.0 - overview the purpose of this manual is to provide step-by-step assembly instructions for the sabio digital kn1 “barebones” whitebook pc manufactured by quanta computer. The kn1 is a flexible, configurable platform ...
Rev. 1.4 sabio digital kn1 assembly guide 4 of 11 www.Sabioproducts.Com check package contents to ensure that all parts have been included. If any parts are missing, please contact sabio digital at 858-715-0070 or send an email to support@sabioproducts.Com . In addition, drivers and a downloadable v...
Rev. 1.4 sabio digital kn1 assembly guide 5 of 11 www.Sabioproducts.Com section 4.0 - system component locator illustrations 4a and 4b highlight the locations of the major components and sub- assemblies of the quanta kn1 notebook: illustration 4a – bottom view illustration 4b – top view battery bay ...
Rev. 1.4 sabio digital kn1 assembly guide 6 of 11 www.Sabioproducts.Com section 5.0 – cpu, thermal module, and discrete graphics installation follow these steps to install the cpu, thermal module, and optional discrete graphics card on the quanta kn1 notebook: 1. Be sure that power is disconnected a...
Rev. 1.4 sabio digital kn1 assembly guide 7 of 11 www.Sabioproducts.Com section 6.0 - memory module installation there are two memory expansion sodimm slots on the sd-kn1 notebook, and the notebook comes standard with no memory installed. The memory capacity is upgradeable up to 2gb using two 1025mb...
Rev. 1.4 sabio digital kn1 assembly guide 8 of 11 www.Sabioproducts.Com section 7.0 - keyboard installation the keyboard is packaged separately and must be installed by the system builder. To install the keyboard, follow these instructions: 1. Open up the notebook completely so that the lcd is level...
Rev. 1.4 sabio digital kn1 assembly guide 9 of 11 www.Sabioproducts.Com 6. Position keyboard flat into the keyboard opening and slide into place under the two side latches. (press right “crtl” key to aide in positioning.) 7. Fasten two screws (m2.5x6.0-i) on top of keyboard to lock the keyboard into...
Rev. 1.4 sabio digital kn1 assembly guide 10 of 11 www.Sabioproducts.Com section 8.0 - hard disk drive installation installing the hard disk drive is a two-step process. The first process involves assembling the hard disk drive into a kit. The second step is to install the assembled hard disk drive ...
Rev. 1.4 sabio digital kn1 assembly guide 11 of 11 www.Sabioproducts.Com section 9.0 - installing the optical disk drive to install, simply slide the optical disk drive into the optical disk drive module located on the right side of the lower chassis until it locks into place. Section 10.0 - wireles...
