SAFERA PCU3 Installation Manual - page 9
17
16
Connect the power supply
Ⓓ to the
Sensor unit
Ⓐ: indicator light panels
❽ are lit in purple.
Put back the fuses for the cooker and
the oven. The Power Control Unit
Ⓒ
will now contact the Sensor unit
Ⓐ
which gives a sound signal (•••).
Press the adjustment mode button
❼: indicator light panels ❽ start
blinking purple-blue.
2
ѧ HINT
You can re-start the installation process
anytime by pressing the adjustment mode
button
❼ for five seconds until you hear
the signal.
1
INSTALLATION - STEP 3/6
Set up the wireless connection
When the indicator light panels
❽ start blinking yellow-green, you need to calibrate
the system. Choose from the two options:
Check that the indicator light for normal activity
❹ blinks every five seconds.
OPTION 1:
Cooker and oven are connected
to the Power Control Unit
Ⓒ.
1
2
OPTION 2:
Only cooktop is connected to
the Power Control Unit
Ⓒ.
Turn on the biggest cooker plate with
maximum power and press the OK-
button
❷. When you hear a
sound signal (•••), turn off
the cooker.
ѧ HINT
With induction cooker, use a compatible
dish.
Turn on the oven and press the child
proof lock button
❶. When you hear
a sound signal (•••), turn off
the oven.
Ⓒ
Ⓒ
Ⓒ
tai
or
INSTALLATION - STEP 4/6
Calibrate the system
3
ON