Saga SAGA-1350I User Manual - 4. Blade Installation
of
27
specialized in developing, designing and manufacturing kinds of vinyl cutter
4. Blade Installation
Caution
Do not touch the tip of the blade with your fingers.
Notice
The blade is a consumable item, and you’ll always
get the best quality cut with a newer blade. Please
replace with a new blade when:
1. The tip of blade is broken.
2. The cutting traces are not as good as they were.
3. The blade will not cut cleanly even though the
blade force has been raised significantly.
Pin
Lock
Adjustment depth knobs
Step1/Step2/Step3
1, Push the blade to the bottom of the blade holder.
2, Adjust the blade tip to suitable length by rotating “
Adjustment depth knobs
”
and then tighten the lock.
3, Press the push-pin to remove the blade from the blade holder when replacing blade.
step1
step2
step3