Saga SAGA-1350I User Manual - 5.6. Key Function

Specialized in developing, designing and manufacturing kinds of vinyl cutter

5.6. Key function

LCD Screen: To display functions and error messages.

Reset: To restart

Copy:  To copy former information

Set:     To set up functions.

Test:    To perform cutting tests in different ways.

Laser:  On/Off laser

     Speed: To adjust the value of cutting speed and quality up.

     Speed: To adjust the value of cutting speed and quality down.

     Force:  To adjust the value of cutting force up.

     Force:  To adjust the value of cutting force down.

Enter: To set item or register the immediately preceding input value.

6.  SAGA Plotter 1350I USB Setup with Windows XP/Vista and 7

Ensure that there is enough space to allow unhindered media input and output 

at the front and rear of the Plotter Cutter.  The operating environment for the 

cutting plotter must be clean and dry.

6.1 Installing the USB Lead

Connect the USB Lead to the SAGA Plotter Cutter and the Computer USB port.

6.2 Installing the USB Interface

1, Attach the Plotter to a 220V/110V mains power supply using the power lead supplied

2, Switch the Plotter Cutter On.  CAUTION – Please note that the cutting head will 

automatically move to the right or left and then stop when switched ON. 

3, Windows will detect the SAGA Plotter cutter and install the USB printing driver 

automatically, please be patient and give Windows sufficient time to recognise

and install the driver.