Saga SAGA-1350I User Manual - Recommended Methods
Recommended Methods
• Gently wipe the cutting plotter surface with a lint-free cloth. If necessary, clean
with a damp cloth or an alcohol-immersed cloth. Wipe with water to rinse off any
residue and dry with a soft, lint-free cloth.
• Wipe all dust and dirt from the tool carriage rails.
• Use a vacuum cleaner to empty any accumulated dirt and media residue from
beneath the pinch roller housing.
• Clean the platen, paper sensors and pinch rollers with a damp cloth and dry with
a soft, lint-free cloth.
• Wipe dust and dirt from the stand.
8.2 Cleaning the Grid Drum
• Turn off the cutting plotter, and move the tool carriage away from the area needed
to be cleaned.
• Raise the pinch rollers and move them away from the grid drum for cleaning.
• Use a bristle brush (a toothbrush is acceptable) to remove dust from the drum
surface. Rotate the drum manually while cleaning.
8.3 Cleaning the Pinch Rollers
If the pinch rollers need a thorough cleaning, use a lint-free cloth or cotton swab
to wipe away the accumulated dust from the rubber portion of the pinch rollers.
To prevent the pinch rollers from rotating while cleaning, use your finger to hold
them in place. If needed to remove the embedded or persistent dust, use the
lint-free cloth or cotton swab moistened with rubbing alcoho
l.
Note: Daily maintenance of your cutting plotter is very
important. Be sure to clean the grid drum and
pinch rollers regularly for better cutting accuracy
and output quality.
specialized in developing, designing and manufacturing kinds of vinyl cutter