SAGEMCOM D16V User Manual - page 21
- 21 -
A beep is issued after each message is broadcast and the next message is broadcast automatically.
Note!
For the
key to operate correctly,
Use it only after 2 seconds as from the start of message playback.
When a message is being left by a correspondent, you can open the line (by
Note!
pressing the key) to answer at
any time.
11.5.1. Listen again to the current message
Press the
key during the playback of the message.
11.5.2. Listen again to the previous message
Press the
key twice to hear the previous message again.
11.5.3. Go to the next message
During playback of the message, press the
key to skip to the next message.
11.5.4. Stop the playback of the messages
Press
the key to stop the playback of the messages.
Press
the key a second time in order to play again the current message.
11.6.
Playing messages using the handset
If you have received new messages, the indicator light of the
key flashes blue and the
icon flashes on the handset.
1.
Press
. Select "
answ machine "using the or key, press
.
2.
Select "
Play" using the or key, press
.
D16V/D18V/D21V
11.7.
Deleting messages
11.7.1. Deleting the current message
During the playback of the message, press the
key.
The message in progress is deleted:
- If you have other messages, the next message is broadcast.
- Otherwise, the answering machine returns to standby mode.
11.7.2. Deleting all messages already played back
1.
In standby mode, hold down the
key until you hear a beep.
This beep informs you that all your messages already played back have been deleted.
- OR -
1.
Press
. Select "
answ machine "using the or key, press
.