Sailor C4951WP Operating And Installation Instructions - page 17
13
6.9
Description of function menu items
Path:
Data:
Description:
DSC\SETTINGS\ACKNOWLDG\AUTOACK
"Y"/"N"
‘Y’ enables automatic acknowledgment of
incoming DSC calls
GENERAL\ILLUMIN\INDICATOR\LEVL_0-3
0-3
Brightness levels of each indicator lamp
GENERAL\ILLUMIN\DISPLAY\DB_L_0-3
0-9
Brightness levels of each backlight display
lamp
GENERAL\ILLUMIN\DIMMER\D_LEVL
0-3
Brightness level when handset switched on
GENERAL\ILLUMIN\DIMMER\D_LEVL\DIMDIR
0-2
Start direction of brightness level (see
diagram on next page)
GENERAL\ILLUMIN\KEYB0ARD\SECS
0-20
Number of seconds light is on after a key
has been pressed
GENERAL\ILLUMIN\KEYB0ARD\SECS\D_LEVL
0-3
Brightness level when any key has been
pressed, as long as above setting is at least
1 second
GENERAL\SOUND\EARPIECE\NORM
0-15
Volume level in earpiece when handset is
switched on
GENERAL\SOUND\EARPIECE\NORM\ALARM
0-15
Volume level in earpiece when DSC call or
intercom received
GENERAL\SOUND\LOUDSPEAK\NORM
0-15
Volume of speaker when handset is switched
on
GENERAL\SOUND\LOUDSPEAK\NORM\ALARM 0-15
Volume of speaker when DSC call or
intercom received
GENERAL\SOUND\LOUDSPEAK\NORM\ALARM
\EXT_SPK
0-3
Handset control of external speaker
GENERAL\SOUND\LOUDSPEAK\NORM\ALARM
\EXT_SPK\HO_SPK
0-1
Speaker state when handset is off its rest.
Default on = 1 or off = 0
GENERAL\SOUND\KEYB0ARD\KBBEEP
"Y"/"N" Beep from keys when pressed
GENERAL\SOUND\SIDETONE\ST ATT
0-3
Feedback level of microphone to earpiece.
Recommended setting = 1
SERVICE\DSC\SELF-ID\GRPEDIT
0-9
Set up or change Group MMSI number
SERVICE\TELEPHONY\CH+MODE\INPUTS
"Y"/"N"
Set up number of digits to be input when
changing VHF channel. Y = 3 digits, N = 2
digits
Operation
0203