Salicru SLC CUBE 3+ User Manual - page 12
12
SALICRU
Representation on the touch screen
Alarms
Ref.
(1)
Overtemperature:
Inverter Stop
INVERTER STOPS
4.36
Rectifier Overload:
Inverter
Stop
4.37
DSP Internal Error:
Inverter Stop
4.38
Output Short-circuit:
Inverter Stop
4.39
Bypass Phases Rotation:
Inverter Stop
4.40
Inverter
Failure/Overload
Inverter Stop
4.41
Voltage Ramp Error:
Inverter Stop
4.42
Parallel System:
Inverter Stop
4.43
Low Battery:
Inverter Stop
4.44
DSP Internal Error:
UPS Stop
UPS STOPS
4.45
Overtemperature:
UPS Stop
4.45A
PFC & Inv. Stop:
UPS Stop
4.46
Parallel System:
UPS Stop
4.47
Emergency
Power Off (EPO):
No Output Voltage
BYPASS STOPS
4.48
Output Short-circuit:
No Output
Voltage
4.49
DSP Internal Error:
Blocked UPS
4.50
DC BUS Voltage
Wrong:
Rectifier Block
RECTIFIER BLOCKS
4.51
Rectifier Blocked:
BLK. UPS>>
BLK. REC
4.52
Desaturations:
Rectifier Block
4.53
Voltage Ramp Error:
Rectifier Block
4.54
Intern. Exec. Error:
Rectifier Block
4.55
Rectifier Block:
DSP Internal Error
4.56
Contactor
Test Failure:
Rectifier Block
4.57
Voltage Ramp Error:
Inverter Block
INVERTER BLOCKS
4.58
Output
DC Voltage:
Inverter Block
4.59
Inverter Blocked:
BLK. UPS>>
BLK. INV
4.60
Representation on the touch screen
Alarms
Ref.
(1)
Inverter Desaturations:
Inverter
Block
INVERTER BLOCKS
4.61
Internal Exec. Error:
Inverter Block
4.62
DSP Internal Error:
Inverter Block
4.63
Inverter Failure:
Inverter Block
4.64
UPS Blocked:
BLK. REC>>
BLK. UPS
UPS BLOCKS
4.65
Internal Initialisation
Error:
UPS Block (DSP)
4.66
Internal
Execution Error:
UPS Block (DSP)
4.67
UPS Blocked:
BLK. INV>>
BLK. UPS
4.68
Internal
Communication Error:
UPS Block (DSP)
4.69
Discharging
DC Bus Wrong:
UPS Block
4.70
UPS Overtemperature:
UPS Block
4.71
Rectifier
Overload:
UPS Block
4.72
Inverter
Desaturations:
UPS Block
4.73
DSP
Internal Error:
UPS Block
4.74
PFC & Inverter
Blockage:
UPS Block
4.75
Parallel
Communications Error:
UPS Block
4.76
Frequency Detection
Failure:
UPS Block
4.77
(1)
Correlation numbering reference with the description of
section 7.3.5 from the document EN014*01 (equipment
user’s manual).
Table 4.
Alarm messages and their correlation refer-
ence.
4.2.1. Data logger browsing.
Browse
Historic
When touching the «Browse Historic» graphic from
side menu in «Alarms» section, the last one hundred
alarms in the equipment can be consulted through
the screen labelled as «Data Logger» (see Fig. 14 as
an example).