Sam4s SER-7000 Quick Start Manual - Initial Clear
SER-7000 Series Quick Start Guide
SER-7000 Series Quick Start Guide
x
13
Initial Clear
CAUTION: Do not share this information with unauthorized users. Distribute the
special S-Mode key only to those you may want to perform this function.
The initial clear function allows you to exit any register activity and return to a beginning or
cleared state. Any transaction that is in progress will be exited and totals for that transaction
will not be updated.
Here are some reasons you may want to perform an initial clear:
x
The register is in an unknown state, and you wish to exit the current program or
transaction without following normal procedures.
x
You have performed a function that includes a compulsory activity, such as
validating or printing, and you wish to bypass the compulsory activity.
x
An initial clear may be necessary as part of servicing, or troubleshooting an SER-
7000 register or system.
Perform this procedure only as necessary. Contact your SAM4S dealer first if you have
questions about operating or programming your SER-7000.
To Perform an Initial Clear:
1. Turn the power switch located on the right side of the register to the OFF
position.
2. Turn the control lock to the
PGM
position.
3. Press and hold the key position where the
CASH
key is located on the default
keyboard layout.
4. While continuing to hold the
CASH
key, turn the power switch to the ON
position.
5. The message “SIGN ON REQUIRED” will display when the initial clear is
complete.
SBTL
3
2
CHECK
6
5
CASH
.
00
TO INITIALIZE:
Press and hold this key position
during power-up in PGM mode.