Sam4s SER-7000 Quick Start Manual - Specifications
14
x
SER-7000 Series Quick Start Guide
SER-7000 Series Quick Start Guide
Specifications
Item Description
Battery
• Type: Ni-MH, 3.6V 70mAh
• Charging Time: 24 Hours
• Life: 3 Years
Data Storage
60 Days (When battery is fully charged)
Interface Serial
(RS-232C 1-4)
• Flow Control:
1. DTR / DSR : H/W Flow Control
2. XON / XOFF : S/W Flow Control
• Baud Rate: 1200 / 2400 / 4800 / 9600 / 19200 Bps
• Voltage Supply: VCC(+5V/200mA) supplies at RS-
232C#1.
Interface Serial
(IRC)
• Mode : Ethernet
• Speed : 10MBps
Same as RS-485 Communication Method
Printer
• Model: STM-210
• Printing Speed: 50 mm / Sec (13.3 Line / Sec)
Auto Cutter
• Type: Guillotine
• Cutting Method: 1 Point Partial Cutting
Display
• Operator Display: LCD (192*64 Dots)
• Customer Display: VFD (10 Digits)
Key Board
• Flat Rubber Key (SER-7000): 160 Key
• Raised Key (SER-7040): 90Key
Power Consumption
• Approx. 28W (Regularity)
Power Requirement
AC 120V 60Hz, 230V 50Hz
Environment Condition
• Temperature: 0
ଇ
~ 45
ଇٻ
• Humidity: 30% ~ 80% RH
Weight
Approximately 17Kg (Box Packing)
Dimensions (mm)
• 400(W)
ശ
450(L)
ശ
305(H)