Sentiotec wave.com4 touch Operating Instructions Manual - page 12
OPERATING INSTRUCTIONS
32/44
4.2.4. MODES
Mode Light
Display Symbols
Description
Off
The coloured lamp is in the standby
mode.
Automatic colour
The chroma is automatically further
switched after the programmed time.
The chroma can be manually further
switched. When colour 7 ends, the
control again changes to colour 1
(=rollover). If the mode is activated,
this is shown with “A” on the display.
Brightness
The brightness of the particular
chroma can be set in this mode. The
adjusted brightness will be adopted for
all 7 colours (0-20).
Manual
The chroma never changes. No time
lapse. The display shows die number
belonging to the active chroma. The
+/- keys can be used to select the
colour desired.
Mode Sound
Display symbols
Description
Switch on-/off
Select sound function with Mode key
and by pressing the ON/OFF key, de-
/activate the MP3 function.
When the MP3 function is switched on
again, it starts with the last settings
Play
MP3 is finished, using the +/- T the
previous or the next track can be
selected.
Shuffle
The shuffle mode is activated or
deactivated again by simultaneously
pressing the +/- key. The display
shows ”Shu“. The MP3 files on the
USB stick are played in random order.
AUX
If no USB stick is connected to the
USB dock and the sound function is
selected, the AUX mode is activated.
The music from an external source is
played. (Ipod, MP3-player, radio, etc.)