SRLine TFT-Monitor User Manual - page 10
Page 10
SRLine monitors user manual
SR SYSTEM-ELEKTRONIK GmbH | Eschachstr. 23| D-78078 Niedereschach | phone +49 77289268-0 | info@sr-line.com
Make sure there is enough space for the connections and no sharp
edges or corners protrude in that area. This may cause damage to
the cable connections and result in a loss of function and
performance.
Information on compliance with the EMC directive
(CE mark)
Within the EU, their are laws regarding the observance of uniform
limits concerning interference radiation and interference immunitiy.
The TFT monitor is designed to comply with these limits. It is therefore
equipped with the CE mark and comes with a certificate of
conformity. Outside the EU, the relevant national regulations have
to be observed.
Devices to be connected to the TFT monitor also have to comply
with the regulatory limits. Only this will ensure that the entire
installation complies with the statutory requirements. Make sure all
devices are equipped with an appropriate mark or a
manufacturer´s declaration.
The connection to the connected devices must be provided via
shielded cables. Cables with foil shields are less suitable than
cables with braided shields and a high degree of coverage. The
connector housing must be round to have connection to the cable
screen.