SRLine TFT-Monitor User Manual - Cleaning
Page 21
SRLine monitors user manual
SR SYSTEM-ELEKTRONIK GmbH | Eschachstr. 23| D-78078 Niedereschach | phone +49 77289268-0 | info@sr-line.com
Cleaning
Disconnect the device from the supply voltage before
cleaning. A dry cloth is sufficent for cleaning regularly. In
case of stronger contamination, the main unit can be
cleaned with a damp cloth and mild detergent (for CRT´s
only). No liquid must reach the inside of the case (open
device).
The use of scouring powder and dissolving detergent is
strictly forbidden.
The interior must be cleaned by the service technican
only.
Before getting the device into service it has to be
completely dry (short-circuit, fire hazard).
Since the surfaces of LCD´s ary very soft and easily
scratched, please use a soft dry cloth ofr cleaning and do
not use chemical cleaning agents.
The torque of the fixing screw on LCD panels should never
exceed 0:39 Nm.
Please never expose the surface of a LCD to shock or
friction as it could result in damage or scratch marks left on
the surface.