SRLine TFT-Monitor User Manual - page 23
Page 23
SRLine monitors user manual
SR SYSTEM-ELEKTRONIK GmbH | Eschachstr. 23| D-78078 Niedereschach | phone +49 77289268-0 | info@sr-line.com
EMC and Safety Equipment
Complicance with standards and guidelines
Certification that the industrial monitors developed to meet the following guidelines that
were adopted by the Council of the European Community, manufactured and tested
were:
2004/08/EC
Electromagnetic Compatibility
EN 61000-6-3 EMC - Emission (Residential)
- EN 55022 B Interference voltage (150kHz - 30Mhz)
- EN 55022 B Radiated field (30MHz - 1Ghz)
EN 61000-6-2 EMC-immunity (industrial area)
- EN 61000-4-2 ESD / Electrostatic Discharge
- EN 61000-4-3 HF-field [ 80 - 2500Mhz]
- EN 61000-4-4 Burst / fast transients
- EN 61000-4-5 Surge / powerful transients
- EN 61000-4-6 conducted RF-Field / circuit bound HF-field
- EN 61000-4-11 Power variations / Net equalization
EMC tests were performed with standard cables with line lengths up to 2.5 meters.
Longer cables are used, then any further tests are required
to demonstrate compliance with the EMC directive.
RF radiation from 1000 to 2500 MHz, 80% AM 1k Hz, 10 V / m verified.
2.5 GHz to 2.7 GHz, 80% AM with 1 kHz and 1 V / m is considered.
93/68/EWG (CE-marking)
2006/95/EC Low Voltage Directive
EN 60950 Safety
Only device matching the EN Standard 60950 may be connected to the existing
interfaces. It is important to watch for "safe electrical isolation" to all the other tools /
data buses.