SRLine TFT-Monitor User Manual - page 9
Page 9
SRLine monitors user manual
SR SYSTEM-ELEKTRONIK GmbH | Eschachstr. 23| D-78078 Niedereschach | phone +49 77289268-0 | info@sr-line.com
Putting the TFT-Monitor into service
Unpacking equipment
The TFT monitor is shipped in a sturdy cardboard box. The monitor is
fixed by a swing-foil and secured against damage during transport.
Keep all the parts at first to have a suitable transport packaging in
case of a necessary return.
Check the TFT monitor and the included accessories for shipping
damage. If there is noticeable damage to the device, it must not
be put into service because the security could be compromised.
Please contact the sender immediately.
Check the package using the delivery note.
Installing the unit
The TFT monitor must not be exposed to excessive cold, heat,
moisture or dirt. The ambient conditions given in the “Technical
data” must be met to maintian operational safety.
Before fixing the unit to a VESA mount check if the permissible
maximum weight for the bracket indicated by the manufacturer is
observed.
When mountig the device take care that adequate ventilation of
the equipment unit is guaranteed.
Also, remember that the temperature in a closed housing may be
much higher than the outside temperature. The termal situation
can be improved by appropriate arrangement of the installations
as well as forced ventilation. Make sure the specified temperature
limits are never exceeded when the unit installed.