SW-Stahl S3200 Instruction manual - page 10
SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
www.swstahl.de
Leverkuser Straße 65
Fax +49 (0) 2191 / 46438-40
D-42897 Remscheid
E-Mail: info@swstahl.de
SPECIFICATIONS
Model: S3200
- 10 -
l
Maintenance of the DC motor. Exercise due
care to ensure the motor does not burn out
due to overloading.
l
Repairs should only be done by a qualified
service technician using identical parts to
ensure the safe and effective use of this
product.
l
Always ensure that the machine is switched
off and the battery cartridge is removed
before carrying out any work on the machine.
l
To maintain product safety and reliability,
repairs, maintenance or adjustment should be
carried out by an authorized service center.
Lubrication
All of the bearings in this tool are lubricated with
a sufficient amount of high grade lubricant for
use under normal conditions before leaving the
factory. Regular addition or replacement of the
lubricating grease is not necessary.
However, on occasions when new or more
lubricant is needed, take the tool to a qualified
technician to do the job.
NOTE: Do not use oil as a grease substitute. It
will leak and degrade the performance of this
product.
ACCESSORIES
All accessories designed for this tool is included
with this product. Storage spaces for drill bits
and driver bits are provided in the carrying case
for your convenience. Bits and carbon brushes
can be obtained through your local retailers. If
the retailer does not have the parts you need,
simply contact the authorized dealers for
instruction on how to order. Be sure to have
ready the model number of the product. Be sure
to have ready the model number of the product.
Voltage:
Chuck Capacity:
No-load
Speed(rpm):
Gear Train:
Clutch Setting:
Max Torque:
Tool Weight:
(without battery)
Battery Weight:
(Ni-MH/ 2.0Ah)
(Li-ion/ 3.0Ah)
Length:
Charge Time:
Charger
accepted:
14.4 VDC
10 mm (3/8”)
Lo: 0~400, Hi: 0~1,400
2 speeds
19 positions
250 in-lbs (288 kg-cm)
2.6 lbs (1.2 kgs)
1.9 lbs (0.85 kgs)
1.3 lbs (0.6 kgs)
8.7” (222 mm)
Approx. 60 mins
Ni-MH/ Li-ion