T&D RTR-500 Introductory Manual - Installing The Usb Driver

19

Installing the Software and the USB Device Driver

Installing the USB Driver

Have you already installed the supplied software?

Before connecting a Unit to a PC with a USB cable make sure to install the supplied 

software first.

If the Base Unit is not an RTR-500, please follow directions for installing the USB Device 

Drivers found in the Introductory Manual that came with the Base Unit you are using.

1.  Open the “RTR-500 for Windows” from the Start Screen or 

Start Menu.

2.  Open the RTR-500 Settings Utility.

3.  Connect the Unit with the supplied USB cable to your computer.

The USB driver installation will start automatically.

- Do not connect a Unit to your computer until the software has been installed.

- It is not necessary to connect the AC adaptor at this point.

4.  The USB driver installation will be completed.