T&D RTR-500 Introductory Manual - Product Specifications
28
Other
Product Specifications
RTR-500
Compatible Devices Remote Units: RTR-501 / 502 / 503 / 507 / 574 / 576 / 505-TC / 505-Pt
/ 505-V / 505-mA / 505-P (Including L Type and H Type),RTR-601-110 /
130 / E10 / E30(*1)
Repeater: RTR-500
Maximum Number
of Registrations
Remote Units: 32 units(*2) x 20 groups
Repeaters: 30 units x 20 groups
Communication
Interfaces
- Wireless Communication (short range radio communication)
FCC Part15 Section247 / IC RSS-210 (Frequency Range: 902 to
928MHz, RF Power: 7 mW)
- Optical Communication (proprietary protocol)
(With compatible Remote Units except RTR-574 and RTR-576)
- USB Communication
- Serial Communication (RS-232C) (*3)
Wireless
Transmission Range
Approx. 150 meters (500 ft) if direct and unobstructed
Communication
Time
Data Download Time from Remote Unit (for 16,000 readings)
- Via wireless communication: About 2 min. 20 sec.
The same amount of time will be necessary for each Repeater.
Communications
Protocol
SMTP (POP before SMTP, SMTP-AUTH MD5>,SMTP over SSL/TLS, STARTTLS), FTP (*4) Power USB Bus Power, AA Alkaline Battery x 2, AC Adaptor (AD-06A1) (*5) Battery Life (*6) As a Repeater: Approx. 6 months (When downloading full data once a day with one Repeater) Dimensions H 96 mm x W 65 mm x D 25 mm (excluding antenna) Antenna Length: 109 mm Weight Approx. 71 g (excluding batteries) Operating Environment Temperature: -10 to 60 °C (-30 to 60 °C with external power connected) Humidity: 90 %RH or less (no condensation) *1 Customers wishing to use the RTR-500 as a Base Unit in conjunction with the RTR-601 series devices, please contact your local distributor for the communications protocol specifications to write your own software. *2 For RTR-574 and RTR-576, registration of one unit will be counted as two units. *3 Customers wishing to write their own software, please contact your local distributor for the serial communications protocol specifications. (Note: Optional serial communication cable TR-07C is also required.) *4 For RTR-500, the protocol is implemented in the software. *5 When using a USB connection, the RTR-500 requires neither batteries nor AC adaptor. Please prepare two AA batteries or an AC adaptor when using the RTR-500 as a Repeater. *6 Battery life varies depending upon multiple factors including ambient temperature, frequency of communication, and battery performance. All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual battery life.