T&D RTR-500 Introductory Manual - 1. Base Unit Settings

23

Other

Registering Devices and Making Settings

This section briefly explains in sequence what needs to be 

done in order to carry out registration of devices and the 

making of settings.  

1. Base Unit Settings 

Before making initial settings please confirm the following:

 Is the Unit connected to a PC with the USB cable?

 Are the LED lamps on the Unit both lighted up?

 Is the PC clock showing the correct date and time?

Open the "RTR-500 Settings Utility" from the Applications Menu, and  

make settings for the Base Unit. 

2. Remote Unit Registration 

1.  After having completed the Base Unit Settings, in the RTR-500 

Settings Utility, open the [Remote Unit Settings] Menu. 

2.  When the direction appears in the application window connect 

the Data Logger to enable communication with the Base Unit 

and/or PC. 

- 

Only carry out Remote Registration on one Unit at a time; do not connect 

multiple Units at the same time. 

RTR-501 / 502 / 503 / 505 / 507 

(Optical Communication)

Place a Data Logger (Remote Unit) 

face down on the Base Unit 

connected to your PC so that the 

optical communication areas meet. 

USB Connection

Optical Communication 

Areas

RTR-574 / 576 

(USB Communication)

With a USB cable, connect the Data 

Logger (Remote Unit) to your PC. 

USB Connection