T&D RTR-500MBS-A Getting Started Manual - page 15

15

5. 

After installation, “RTR-500MBS for Windows” will appear in the 

Windows Start Screen or Start Menu.

6. 

Repeat the same procedures from   to install all the applications.

2

 Connecting the Base Unit to a PC

1. 

Open the “RTR-500MBS for Windows” from the Windows Start 

Screen or Start Menu.

2. 

In the displayed launcher window, click and open the 

“RTR-500MBS Settings Utility”.

3. 

Turn the operation switch on the Base Unit to , and connect 

it to the computer with the supplied USB cable.

4. 

The USB driver installation will start automatically.

5. 

After the USB driver installation is completed, a window will open 

where you can make or change various settings related to the 

RTR-500MBS-A.

If the settings window does not automatically open:

If the settings window does not appear after one minute of USB 

connection, try reconnecting the USB cable. If this does not work, 

please see [  Help for Unit Recognition Failure] in the launcher menu 

and check the USB driver.