T&D RTR-500MBS-A Getting Started Manual - page 17
17
Making Settings & Transmission Tests
1
Making Basic Settings for Base Unit
2
Making Settings for T&D WebStorage Service
3
Registering a Remote Unit
4
Making Transmission Tests
1
Making Basic Settings for Base Unit
• In order to prevent unnecessary or unexpected data
transmission, we suggest turning the Operation Switch on
the Base Unit to
up and ready for communication.
• Once the Operation Switch has been turned to the
position, auto-sending of current readings and/or recorded
data becomes activated.
1.
Open the "RTR-500MBS Settings Utility" and connect the Base Unit
via USB to your PC.
2.
The settings window will automatically open.
3.
Open the [Base Unit Settings] menu and enter the necessary
information such as the Base Unit Name and Mobile Data
Communication info.
Base Unit Name
Assign a unique name for the Base Unit.
Mobile Data Communication
Enter the information provided by your carrier.
4.
After having completed all entries, click [Apply] at the bottom of the
window to apply the settings(*).
* It is necessary to apply the settings in each setting menu.