T&D RTR-500MBS-A Getting Started Manual - page 19
19
Auto-Sending of
Recorded Data
ON
Transmission
Scheduling Method
Select either method.
Transmit by day
and time
Make settings here for dates and times for the
automatic downloading and sending of recorded
data. Up to eight patterns can be set.
If you select more than one date and time, make
sure that they are six or more hours apart.
Transmit by
Interval
Specify the interval at which you wish to have data
automatically sent and choose at what minute of the
hour you wish to have the next transmission occur.
Transmission Method
FTP
File Name
6.
After entering the necessary information, click [Apply].
3
Registering a Remote Unit
1.
Open the [Remote Unit Settings] menu.
2.
Click [Register] to open the registration window.
3.
Click [Yes] to the confirmation message. Follow the on-screen
instructions and connect the target Remote Unit.
• Optical Communication: RTR-501 / 502 / 503 / 505 / 507
Place the Remote Unit face down on the Base Unit connected to the
computer so that the optical communication areas meet.
Optical Communication Area
USB
• USB Communication: RTR-574 / 576
Connect the Remote Unit with a USB communication cable to the
computer.
USB
USB
If the screen does not change after connecting RTR-574 / 576:
• Do not connect more than one Remote Unit to your computer at one time.
• The USB driver may not have been installed correctly. Please see [Help for Unit
Recognition Failure], and check the USB driver.
4.
Enter the following information in the [Remote Unit Registration]
window.