TAG Heuer HL 610 Operating Instructions Manual - page 8
8
6. TECHNICAL SPECIFICATIONS
Type of emission :
ISM Band – 433.5 6MHz
Code :
4 differentiated Channels (A, B, C, D)
Radiated Power Output :
10 mW
Range :
Superior to 2 km under optimal conditions, direct view
Antenna :
Multiflex 1/4
Timing Impulse Inputs:
Open Working contact. Respect the polarities (Black = Ground)
Timing Outputs:
4 opto-isolated independent output
Precision :
Fixed delay of 100ms +/- better than 1/10,000
th
second.
Signal Transmission Evidence: By audible tone (buzzer) and LED (1, 2, 3, 4)
Signal Reception Evidence:
By audible tone (buzzer) and LED (1, 2, 3, 4)
Signal Reception Monitoring :
By 4 LED’s. Control of the quality of the reception and of
eventual disturbances.
Battery Condition Monitoring:
By red LED (POWER)
On -> well charged
Flashing -> to be recharged
Power Supply :
By internal battery (lithium) for the transmitter and by internal
rechargeable accumulator for the receiver
Charger :
AC/DC Adapter
100 – 240 VAC / 9VDC – 550 mA
Polarity : positive at the center of the plug
Autonomy :
Approximately 3 years for the transmitter
Approximately 24 Hours for the receiver at 20°C
Operating Temperature Range: -20°C à + 60 °C
Mounting:
By Velcro or Serflex strap
Dimensions & weight
Transmitter : 100 x 57 x 32 mm / weight of 175 gr.
Receiver : 100 x 82 x 32 mm / weight of 380 gr.
Guaranty :
One year starting from the purchase date
The guaranty is null and void under the following conditions:
- Accumulators or battery out of use
- Bad maintenance and obvious damages
- Input or Outputs damaged by bad connection
- If the device was open without factory authorization