TAG MCLAREN AUDIO CDT20R Owner's Manual - page 9
Your CDT20R can be set to repeat tracks, selected sections
of a CD or the entire CD. The controls for this are only on the
remote control.
Press the repeat button to repeat the track that is playing.
The word REPEAT is displayed. This track will continue to repeat
until you press the repeat button again twice
(1)
.
If you press the repeat button twice the words REPEAT ALL are
displayed. The CD will continue playing to the end and then start
again from the beginning. The entire CD will continue to repeat
until you press the repeat button again.
The a-b button is used to set up a section of the CD to be
repeated. The section can include more than one track.
Go to the start of the section you want to repeat using the track or
search button and press the a-b button. The display will show A -.
Now go to the end of the section using the track or search button
and press the a-b button again. The display will now show A - B
and the CDT20R will return to the start of the section and keep
repeating it.
Press the a-b button again to stop repeating the section.
You can also use the a-b button to select a section of the CD
to be skipped (i.e. the selected section will not be played).
If you set up A - B playing so that B is earlier than A, then the
section between them will be skipped.
For example, press the a-b button when the total time played
is 20 minutes. Then use the search – button to go back to 12
minutes and press the a-b button again. Start playing the CD
from, say, six minutes. When 12 minutes is reached, play will
skip to 20 minutes and continue to the end of the CD.
Press the a-b button again to return to normal playing.
skip section
repeat track
repeat all tracks
repeat section
16
17
repeat play
repeat play
1. The
repeat button cycles through REPEAT, REPEAT ALL and back to normal play
(REPEAT is no longer displayed). Pressing the stop button also clears the repeat
settings
+
search
-
press twice
GRA00046.1-[CA]CDT20R 13/03/01 09:53 Page 17