Tait T2009 User Manual - User Information
4
User information
User information
The T2009 power supply enables you to use your Tait T2000
mobile radio as a desktop radio.
The T2009 is a switched mode power supply. It converts
mains input voltage to regulated 13.8V
DC
using pulse width
modulation (PWM) control.
The T2009 power supply is protected against short circuits,
as well as over-current and over-voltage conditions.
Check the mains supply voltage
Before you plug in and turn on the power supply for the first
time, please check the mains supply voltage.
The voltage rating of the T2009 is printed on a label on the
bottom of the power supply. Verify that it corresponds with
your local mains supply voltage (that is, 120V
AC
or 230V
AC
).
The variations in mains supply voltage under which the
T2009 can operate, are listed in the
.
Turning the power supply on
The T2009 has an illuminated on/off switch, marked “I” for
on and “O” for off. Turn the power supply on by pressing the
“I” side of the switch. The indicator inside the switch will
illuminate.
Note:
If the T2009 does not turn on, refer to
.
Turning the power supply off
Before you turn the power supply off, turn the radio off as
described in the user documentation for the radio.