Tait T2009 User Manual - Cooling
User information
5
To turn the power supply off, press the “O” side of the power
switch.
Cooling
The T2009 is cooled by convection cooling (normal airflow
around the power supply).
Caution:
Place the unit in a well ventilated and cool area.
Do not block the ventilation openings on the sides, back or
top of the unit.
Using the microphone
Your radio can be programmed to activate or deactivate
scanning or monitoring through the “hookswitch” feature.
For more information, refer to the user and programming
documentation for your radio.
Servicing
By following the procedures in this user’s guide, and by exer-
cising normal care, theT2009 will give you trouble-free serv-
ice for many years. However, when required, servicing should
be carried out by a qualified service technician. Within the
warranty period, servicing must be carried out by your Tait
dealer.
Installation information
Caution:
Install the T2009 indoors. It is not designed for
operation out-of-doors or in wet environments.
Note:
When using a Tait radio in a desktop or despatcher
configuration (that is, in conjunction with the T2009 at a
fixed location), check the maximum legal transmit output
power as defined by the local regulatory authority (often in
the range of 1 to 5W). Exceeding this output power may
result in prosecution.