TANDBERG FieldView User Manual - page 26
22
TANDBERG
FieldView Device User Guide
D14041.02 January 2008
8. Maintaining the FieldView Device
Follow the guidelines below to ensure the FieldView Device remains in good
working order:
8.1. General Recommendations
•
Do not expose the FieldView Device to dust, rain or moisture.
•
Protect the FieldView Device from temperature extremes (e.g. Do not leave it
on an automobile dashboard or on top of a heat source).
•
Observe the rated operating and storage environmental specifications.
•
The FieldView Device is a precision instrument and must be protected from
drop and vibration. Always use the provided wrist lanyard or a neck strap to
prevent accidental drop.
•
Operate the FieldView Device in a well ventilated area to prevent
overheating. Do not block cooling vents. Do not operate the FieldView Device
in a closed environment where it can overheat (e.g. a sealed plastic bag).
8.2. Display/Touch Screen
•
LCD displays deteriorate when exposed to ultraviolet rays. Do not leave the
FieldView Device in direct sunlight or strong ultraviolet rays for extended
periods of time.
•
If you store the FieldView Device above or below the rated storage
temperature, it may cause permanent damage to the display.
•
Extended contact with water drops or finger grease may cause discoloration
or spots.
•
Protect the screen from scratches. Use the supplied stylus or plastic-tipped
pens designed for use on a touch screen. Never use a sharp object on the
touch screen.
•
Tap the screen lightly. Do not press hard or strike the screen.
•
Clean the screen with a soft cloth moistened with distilled water. Do not use
commercial or household cleaners as they may damage the screen.
•
Consider using a replaceable screen protector to help protect against
scratches.
8.3. Optics
•
If you will be using the FieldView Device in a dusty or dirty environment, it is
recommended that the lens be protected with a screw-on lens filter such as a
standard 30mm skylight filter.
•
Clean the lens with optical lens cleaning cloth and cleaning solution. Do not
use general purpose tissue.
8.4. Ergonomic Recommendations
Important:
Follow the recommendations below to minimize risk of ergonomic
injury.
•
Follow the recommendations of your Health and Safety Officer regarding your
company’s safety policies and procedures.
•
Whenever possible, reduce or eliminate repetitive motion.
•
Maintain a natural position while operating the equipment.