TANDBERG MXP User Manual - page 38
D14034.04—MAY 2008
38
MXP Video endpoints
User Guide
Video meeting features
If you need to specify the presentation source…
Running a presentation
The presentation functionality in the system
enables you to show other available video sources
in addition to your main camera.
This is perfect for meetings where you would like
to show a PowerPoint presentation, for example.
You can even use Arrow keys up and down on the
remote control to activate Page Up/Down on the
PC (this applies when using
VNC
only).
You can also use the presentation feature outside
a call to make a local presentation for the people in
your own meeting room and when you are in a call
use it to make a presentation for the far end as well.
The quickest way to show a presentation is to
use the Presentation key on the remote control.
Pressing the Presentation key causes a predefined
video source to be shown, PC is the default.
You may change the presentation source in the
Presentation menu. Choose Presentation from
the main menu if you want to select a video source
manually. The Presentation menu offers you all the
available video sources supported by your system.
The number of sources that can be connected
varies with the type of video system you have.
The default setting (marked by a green ring
can be set in the Control Panel by your
system administrator. Note that this setting
may be password protected.
Connect your presentation source to your
1.
video system…
Use dual video stream if you can!
Video systems equipped with the optional
dual
video stream
provides the opportunity to show two
different live video streams simultaneously, main
video and one additional source. This is handy
when showing a presentation. You will then let the
others see the live presentation along with the live
video of the presenter—simultaneously.
If in doubt, consult your system administrator to
find out if your system has this capability.
More on this can be found on the following page.
Not all system have all choices
The larger video systems have all the presentation
source choices available, while the smaller systems
have a subset only.
The following list applies:
TANDBERG MAESTRO MXP
TANDBERG TACTICAL
MXP
TANDBERG 3000
MXP
TANDBERG 6000
MXP
TANDBERG 8000
MXP
TANDBERG 770/880/990
MXP
TANDBERG 75/85/95
MXP
TANDBERG 1000
MXP
TANDBERG 1700
MXP
TANDBERG 550
MXP
Once your presentation is done, press the
3.
Presentation key again to return to normal mode.
Press the
2.
Presentation key on the remote
control to enter Presentation mode…
…then do your presentation…
Press the Presentation key and
hold it for a second…
…or navigate to the Presentation icon in the
main menu and then press the OK key…
You may now make your choice. Once made, press the OK key to
exit the menu, putting changes into effect. The system will now be
in Presentation mode…
Camera
PC
Document Camera
DVD/
VCR
VNC
Auxiliary
Cancel
The green
circle
indicates
the default
setting.
This menu shows
how it looks for
a fully equipped
system. Your
system may have
less options—see
text for details.