Tascam CC-222MK Owner's Manual - 7- Cassette Operations
0
TASCAM CC-222MKIII
Dubbing tapes from the CD deck
To record from the internal CD deck:
1 Prepareforrecordingasdescribedabove(loada
tape,settheREVMODE,etc.).
2 LoadthesourceCDdisc(pressthe
OPEN/
CLOSE
key,putthediscinthetray,recorded
sidedownwards,andclosethetray).
3 Usethe
MENU
keytosetthedubbingvolumeto
THRU
tobypasstheinputlevelcontrol(see “By-
passingtheinputlevelfordubbing”onpage23).
Ifyouwanttoadjusttheinputvolume,setthe
DUB>VOL
menuto
ON
andusetheleft(tape)
IN-
PUT
controltoadjustthelevelofsignalsfedto
thetapefromtheCDplayer.
NOTE
If you want to record the tracks on the tape in a
different order from those on the disc, use the pro-
grammed playback mode to rearrange the tracks
(see “Program playback” on page 17). Leave the
disc in stop mode when you have finished program-
ming the order.
4 Pressthe
DUB 2
key.
If the tape is in stop mode,
thetaperewindsto
thebeginningofthecurrentside.
Atthestartofthetape,recordingstarts,butthe
CDdoesnotstartplaybackforeightseconds.
The
Dubindicatorflashes.
TheCDstartsplaybackaftertheeightseconds
atthestartofthecassette.The
Dub,2indicator
lightssteadily.
If the tape is in record standby mode,
recording
startsimmediately,andtheCDstartsplayback
immediately.The
Dub,2indicatorlights.
The dubbing stops when playback reaches the end of
the CD, or when the tape reaches the end of its run (one
side in the case of single-sided (
Ä
) reverse mode, both
sides in the
Ë
reverse mode), whichever comes first.
Note that if the tape is set to auto-reverse, and the last
item recorded on one side of a tape was not completely
recorded before the tape was reversed, that item will be
automatically repeated.
Also note that when the tape automatically reverses,
eight seconds are used as non-recorded time at the
beginning of the second side (the tape is in record
mode, but the CD does not play back), again to allow
for leader tape at the start of the cassette.
The dubbing process can also be stopped manually with
the
STOP
key of the cassette deck or the CD deck. All
other transport keys are disabled.
NOTE
Dubbing is not possible if a cassette is not loaded,
or a CD is not loaded. It is not possible if the cas-
7- Cassette operations
Cassette operations
Recording operations
Recording pre-recorded tapes, records, or other pub-
lished or broadcast material may infringe copyright
laws. Check before recording.
1 Setthe
REV MODE
switch.
Ifyouwanttomakeabi-directionalrecording,
setthe
REV MODE
switchtothe
Ë
or
ä
posi-
tion.
Settothe
Ä
positionifrecordingistobemade
onasinglesideofthetape.
2 Loadarecordablecassette.Checkthatthesafety
tabsonthespineofthecassetteareinplace.If
theyhavebeenbrokenoff,blocktheholeswith
adhesivetape.
3 Pressthe
INPUT 2 SEL
keytoselecteither
liNe2
or
Discasarecordingsource.
When
Discisselected,thebuilt-inCDplayer’s
outputisselectedasasource.
When
liNe2isselected,theexternalsignalfrom
the
LINE 2
jacksisselectedasasource.
4 Setthe
DOLBY NR
systemonoroff.
5 Pressthe
RECORD
key.Thedeckentersrecord
standbymodeandtheindicatorslightup.
6 Playbackthesource,andadjusttherecording
levelusingthetapedeck’s
INPUT
levelcontrolso
thattheloudestsoundmakesthemetersbriefly
reacharoundthe “0dB”pointfornormalor
high-positiontapes(recordingisnotpossible
withmetaltapes).
7 Presseitherthe
PAUSE
or
PLAY
keytostart
recording.
Tostoprecordingtemporarily,pressthe
PAUSE
key.Torestartrecording,presseitherthe
PAUSE
keyor
PLAY
keys.Ifthe
PLAY
keywhoseindica-
torisunlitispressed,therecordingdirection
willreverse,andthe
PLAY
keymustbepressed
againtorestartrecording.
8 Tostoprecording,pressthe
STOP
key.