TATA Motors Connectnext User Manual - page 46
45
GETTING STARTED
CHANGE VOLUME SETTINGS
NOTE:
The default value of Speed Dependent
Volume is, ‘3’ and when set to ‘0’ it
corresponds to switching OFF the
volume.
S
ETTING
P
HONE
A
UDIO
V
OLUME
This option sets the in-call volume of the connected phone.
To set the phone audio volume:
1. In the Volume screen, navigate to and select the
Phone Audio Volume option. The system displays
the Phone Audio Volume screen.
2. Modify the value of the option by setting it to a new
value in the range of 0 to 30.
NOTE:
The default value of Phone Audio Volume
is, ‘10’.
S
ETTING
S
TARTUP
V
OLUME
To set the startup volume of the system:
1. In the Volume screen, navigate to and select the
Statup Volume option. The system displays the
Startup volume screen.
2. Modify the value of the option by setting it to a new
value in the range of 5 to 20.
NOTE:
At system startup, if the system volume is
higher than the startup volume, the lower
of them will be set as the volume.
DEFINITION:
Startup volume is the audio volume at which
your music will be played, when the system is
switched ON with the vehicle ignition switch
ON. At system startup, the lower of the system
volume or startup volume will be used as the
system audio volume.
03