Taurus 24VACH Instruction Manual - page 13
After Sales Support TEL: 1800 909 909 EMAIL: info@globalpowerbrands.com
MODEL: 24VACH PLU: 44624 03/2015
13
After Sales Support TEL: 1800 909 909 EMAIL: info@globalpowerbrands.com
MODEL: 24VACH PLU: 44624 03/2015
Battery charging
IMPORTANT. Before attempting to charge the battery,
check the charger and the battery to ensure the charging
equipment matches the battery supplied. The components
are all labelled with component numbers.
CAUTION! The rechargeable battery is not fully charged
on leaving the factory. Charge the rechargeable battery
for approx. 1 hour before first use, or until fully charged as
indicated by the red light going off on the charger.
CAUTION! The working temperature of the charger is
0°C to 45°C.
Note: If the battery pack is incorrectly orientated the battery
will not fully enter the base as depicted.
1. Connect the power supply from the charger plug pack (8)
to the charger base (11) via plugging the plug from the
charger plug pack into the charger base housing.
2. Plug in the charger plug pack (8) and switch on at the
power supply. The Green LED power indicator located on
the charger base will indicate that the charger base (11)
has power connected to it.
The small LED indicator on the plug pack charger (8) will
also illuminate as a indication the plug pack charger (8) is
on and operating.
3. Align the battery pack with the charger base (11). Insert
the battery pack and slide it firmly into position. (Fig C)
The LED charging light on the charger will light up RED
during the charging process. When the battery is fully
charged, the RED light will go off. The standard charging
time is approx. 1 hour.
The Green light will remain on until the charger plug pack
is turned off or disconnected.
C
24VACH IM ED13 T2.indd 13
25/11/14 5:16:50 PM