Taurus 24VACH Instruction Manual - page 7
After Sales Support TEL: 1800 909 909 EMAIL: info@globalpowerbrands.com
MODEL: 24VACH PLU: 44624 03/2015
7
After Sales Support TEL: 1800 909 909 EMAIL: info@globalpowerbrands.com
MODEL: 24VACH PLU: 44624 03/2015
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
5. Battery tool use and care
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
b) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
c) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact.
If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
6. General safety information for battery-powered
drill/drivers.
Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
7. Drill safety warnings:
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
8. Safety notes for battery/charger.
a. Keep the charger away from rain or damp
conditions. Water entering into the charger will increase
the risk of an electrical shock.
b. Only use chargers recommended by the
manufacturer to recharge the battery. There is a risk
of fire if it is used with other batteries.
c. Never use to recharge third-party batteries. The
charger is only designed to charge the supplied batteries
(Li-Ion) using the voltages specified in the Technical Data.
Otherwise there is a risk of fire or explosion.
d. Keep the charger clean. Contamination will increase
the risk of an electrical shock.
e. Check the charger, cable and plug each time you
use the unit. Do not use the charger if you find any
damage. Never open the charger up yourself, have
it repaired by a qualified specialist only and with
original replacement parts. A damaged charger, cable
or plug will increase the risk of an electrical shock.
f. Never operate the charger on a surface that will
burn easily (for example, paper, textiles etc) or in
a flammable environment. There is a risk of fire
occurring as a result of the heat generated during the
charging process.
24VACH IM ED13 T2.indd 7
25/11/14 5:16:45 PM