Taurus TTA-11241 Instruction Manual - page 11
Additional Safety Instructions for your Belt & Disc Sander
(Cont.)
•
Do not sand with the workpiece unsupported. Support the workpiece with the
backstop or table. The only exception is curved work performed on the outer
sanding drum.
•
Never perform layout, assembly or set-up work on the table while the sander is
operating.
•
Always turn the machine "OFF" and disconnect the cord from the power source
before installing or removing accessories.
•
Never leave the machine work are when the power is "ON" or before the machine
has come to a complete stop.
•
Never use solvents to clean plastic parts. Solvents could possibly dissolve or
otherwise damage the material. Only a soft damp cloth should be used to clean
plastic parts.
•
Should any part of your sander be missing, damaged, or fail in any way, or any
electrical components fail to perform properly, shut off switch and remove plug
from power supply outlet. Replace missing, damaged or failed parts before
resu ming operation.
•
The use of attachments and accessories not recommended by Taurus may result in
the risk of injuries.
·
WARNING: Some dust particles created by power sanding, sawing, grinding,
drill and other construction jobs contain chemicals known to cause cancer,
birth defects or other reproductive harm. Some examples of these chemicals
are:
•
Lead from lead-based paints.
•
Crystalline silica from bricks and cement and other masonry products.
•
Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals:
•
Work in a well-ventilated area.
•
Work with approved safety equipment, such as those dust masks that are
specially designed to filter microscopic particles.
Important Note:
Ensure the supply is the same as the voltage given on the rating plate. The tool is
fitted with
a
two-core cable and plug.
Remove the mains plug from socket before carrying out any adjustment or servicing.
After Sales Support Tel: 1300-355-255
·
9