Taurus TTA-11241 Instruction Manual - page 8
General Safety Instructions
(Cont.)
Personal Safety:
·
Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power
tools
may result in serious pers
o
nal injury.
·
Use protective safety equipment. Always wear eye protection. Protective safety
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
·
Avoid unintentional starting. Ensure the switch is in the 'off' position before
connecting to a power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energising power tools
that have the switch on invites accidents.
·
Remove any adjusting key or wrench before turning the power tool on. A
wrench or key left attached to a rotating part of the power tool may result in
personal injury.
·
Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
·
Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
·
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of these devices
can reduce dust related hazards.
Power Tool Use and Care:
·
Do not force the power tool. Use the correct power tool for your application.
The correct power tool wi" do the job better and safer at the rate for which it was
designed.
·
Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
·
Disconnect the plug from the power source and/or battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power
tool
accidentally.
·
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power to
ols are dangerous in the
hands
of untrained users.
After Sales Support Tel: 1300-355-255
6