Taurus TTA-11241 Instruction Manual - page 7
General Safety Instructions
WARNING!
Read and understand all
i
n
s
t
r
u
ctio
ns
.
Failure to follow all
instructions listed below may result in
e
le
c
tric shock, fire and/or serious injury.
T
h
e
term "power tool" in all of the warnings below refers to your mains
operated (corded) power tool or battery-operated (cordless) power tool.
Please safely store all warnings and instructions for future reference.
Work A
r
e
a
Safety:
·
Keep work area clean and well lit.
C
luttered or dark areas invite accidents
.
·
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
·
Keep children and bystanders away while operating a power tool.
Distractions
can cause you to lose control.
Electrical Safety:
·
Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. U
nmo
d
ifie
d
plugs and matching outlets w
i
ll reduce
t
he
risk of
e
le
c
t
ric
shock.
·
Avoid body contact with earthed or grounded surfaces such as pipes,
r
ad
i
at
o
r
s
,
ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
·
Do not expose power tools to rain or wet conditions.
Water entering a power
tool will increase the risk of electric shock.
'. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shoc k.
·
When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric
shock.
·
If operating a power tool in a damp 'Iocation is unavoidable, use a residual
current device
(ReO)
protected supply.
Use of an RCD redu
c
es the risk of electric
shock.
After Sales Support Tel: 1300-355-255
5