Taurus TTA-11241 Instruction Manual - page 9
General Safety Instructions (Cont.)
Power Tool Use and Care (Cont.):
·
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use.
Many accidents
are caused by poorly maintained power tools.
·
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to stick and are easier to control.
·
Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed.
Use
of the power tool for operations different from those intended could result
in
a
hazardous situation
Service:
·
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
Health
Advice
WARNING!
When drilling, sanding, sawing or grinding, dust particles will be
produced. In some instances, depending on the materials you are working
with, this dust can be particularly harmful to you (e.g. lead from old gloss
paint).
You are advised to consider the risks associated with the materials you are workihg
with and to reduce the risk of exposure. You should:
•
Work in
a
well-ventilated area.
•
Work with approved safety equipment, such as those dust masks that are specially
designed to filter microscopic particles.
After Sales Support Tel: 1300-355-255
7